rccarguy's latest activity
-
Rrccarguy replied to the thread Wiim Ultra, my best DLNA streamer.
-
Rrccarguy replied to the thread Wiim Ultra, my best DLNA streamer.Just do batch ripping, say 5 albums a day whilst you're on your PC.
-
Rrccarguy replied to the thread WiiM Ultra with Integrated Amp.I had the same sub. Correct it doesn't have a bypass setting, max is 85hz.
-
Rrccarguy replied to the thread WiiM Ultra with Integrated Amp.You don't want to have cascading crossovers. If you are sending filtered signal to the sub, you don't want another one in the sub.
-
Rrccarguy replied to the thread How would you do it?.Nope, pure direct disables everything. Analogue to Digital conversion Room correction Crossovers Bass/treble controls Levels Distance...
-
Rrccarguy replied to the thread Does this make sense?.Probably easier to just get an avr, a speaker switch for now. I mean an amplifier swtich, two amps, for one pair of speakers
-
Rrccarguy replied to the thread Does this make sense?.I'd say replace the soundbar with a AVR and speaker system at least 5.1, adding speakers to your existing stereo setup. You would need...
-
Rrccarguy replied to the thread Ultra HDD scanning.In my experience a forced rescan on NAS music server is much better method, if it's constantly monitoring folders/files the NAS goes...
-
Rrccarguy replied to the thread How would you do it?.If you set pure direct, it bypasses all crossover setting. So for analogue input that is best Unless the DAC in the Yamaha is better...
-
Rrccarguy replied to the thread Sub crossover setting.If you use sub from wiim to sub, that would mean needing to adjust volume on the ultra (variable) then matching and changing realative...
-
Rrccarguy replied to the thread Sub crossover setting.High passing your speakers means something like this, a high pass device between pre and power.
-
-
Rrccarguy replied to the thread Sub crossover setting.Ok, a streamer, pre amp, power amp, passive speakers. Connect L/R analogue output from Wiim Ultra into "CD" input or similar. Set Wiim...
-
Rrccarguy replied to the thread Sub crossover setting.https://www.ukaudiomart.com/details/649551545-ads-l10902-high-fidelity-speakers-ads-1090-2/images/2394246/ Passive? Therefore you will...
-
Rrccarguy replied to the thread Sub crossover setting.You need an amplifier for your speakers, if they're passive
-
Rrccarguy replied to the thread Ultra room correction results.Generally a good speaker should be flatish from 300hz and up so you don't need to correct it. 300hz and below is the typical peaky areas.
