wiim pro

  1. S

    Lag starting Each Track - Using Optical Input

    I have my WiiM Pro being fed through its Optical Input*. I have the Optical Output set to fixed resolution 24/96. For each track, there is a millisecond or first note delay. This happens on every track. I don’t get this delay using Tidal Connect nor AirPlay. * The long story is that I am...
  2. B

    If you're only using the coaxial output, how should you choose between the PRO and the PRO+?

    If you're only using the coaxial output, how should you choose between the PRO and the PRO+?Also, if I only use the coaxial output, will upgrading to the Ultra result in better sound?thanks.
  3. N

    Wiim Pro often disconnect, need restart.

    Hello, I'm using Wiim Pro since 15 month, in the last time it always disconnect after a couple of hour of work. I'm using Spotify. Firmware is update. How can I resolve this issue? Thanks Claudio
  4. M

    EQ not responding

    Hi, Equalizer stop responding. This is second time. I was using it. What I did or why? I rebooted now it's the same. EQ and roomfit doesn't change/control the sound.
  5. N

    My Wiim has started just turning on radio channel at random

    Hi, My Wiim has recently started to turn on a radio station at random. It can happen when I listen to music and when I don’t listen to anything. Sometimes it also skips to the next song in the middle of a song when I listen to music (on Tidal). Is this a known issue?
  6. C

    WIIM pro and QOBUZ connect

    I have Qobuz connect running fine on my wiim pro but with a small annoyance. When I pause music for some minutes it drops the connection to Qobuz connect, I then have to re-establish the connection. I am using the the Quobuz app on android as well as Quobuz web player (using Chrome on a Linux...
  7. C

    active XO streaming (essentially multi-channel)

    Hello - looking forward to Wiim but... Currently have jRiver -> USB -> multi-channel dac for a three-way active system, It's important to keep the channel mappings so I don't set a thousand watts of bass through my tweeters:) Can I connect the Wiim pro to my multi-channel dac (Motu mk5) and...
  8. Sergkuper31

    Qobuz quality problem

    Hello. I noticed one very unpleasant moment. I assigned my playlist in Qobuz to one of the presets. I press the button on the remote control, the preset plays, everything is fine, but all tracks are played at 44.1 kHz. If you turn on your playlist not through the preset, the frequency is...
  9. M

    Cloud NAS connection

    Hi, Can I connect my cloud NAS with WiimPro?
  10. E

    Choosing the Right WiiM Streamer for a High-End External DSP System (Pro vs. Pro Plus vs. Ultra)

    tl;dr: I'm feeding a miniDSP Flex HT via Toslink for all processing, so the WiiM's DAC and analog outs won't be used. Is there any reason (better clocking, cleaner digital signal, etc.) that the Pro Plus or Ultra would perform better as a pure transport than the standard WiiM Pro in a high-end...
  11. B

    The epic journey I had to take to get to 96kHz streaming

    I want to play full quality FLAC through my Wiim Pro out through the RCA output to a Sony 2-Ch Receiver. The challenge is that my setup is in a different physical location from my server. The files are stored on my Unraid server. It took me a long, long time to get this working. Unraid server...
  12. Q

    Transmit a local source over Wi-Fi from optical input?

    I am totally new to networking audio, and I greatly appreciate any advice on what I hope to be a simple project. I seek to stream my vinyl from the living room to the home theater in the basement losslessly for the purpose of running the live feed through an Involve Audio Surround Master V3...
  13. M

    Configuration Setup using Ethernet

    Is there something that we have to configure in the set up of the WiiM pro to allow for the audio signal to be sent via ethernet cable? I noticed that there are options for selecting digital cable or optical cable in device set up, but I don’t see anything that allows us to select for ethernet?
  14. rarewolf

    New playback issue using WiiM Pro with Jriver server

    I use a WiiM Pro to remotely provide PCM via coax to my DAC/amp stack. This is usually accomplished by using Jriver’s Jremote smartphone app to select music from the Jriver media server and choosing the WiiM as the playback zone. The Jremote app offers several playback zones, including the...
  15. T

    Does WiiM pro have stuttering playback issue when using EQ like the WiiM Mini?

    Have you folks been able to use both the PEQ and Graphical EQ on the Pro without any stutters in playback from Airplay? I recently purchased a Wiim Mini and I discovered that when I use the EQ, there are occasion stutters in playback from Airplay. Turning off the EQ seems to fix the problem...
  16. B

    Static in line out on Wiim Pro

    I have a new unit Wiim Pro and there is static in the line out but not the optic out. For my application I need to use the line out. Is there a setting i can adjust? Any insights?
  17. X

    Replacing a Wiim Pro with Wiim Pro Plus

    I just bought a Wiim Pro Plus to replace my Wiim Pro. What's a good way to do this without having to write down and re-enter all of the settings from the old device, which I plan to reset to factory defaults so that I can gift it or sell it? Is there a way to export/save settings somewhere and...
  18. E

    Newbie WiiM Pro

    Im sure this has been asked and answered...but I can't find the thread. I have a Sony 2ch receiver that has Bluetooth capabilities to stream from my phone....so that works. What I want is to stream my TT or maybe cassettes through my Sony receiver to Bluetooth speakers throughout my house. My...
  19. B

    Request to Disable Nightly Optical Output Activation

    During nightly system checks or automatic updates, the WiiM Pro activates its optical output. My device is connected to an amplifier with an auto-sensing function, which detects the signal and powers on. As a result, my speakers produce a loud pop sound when the amplifier shuts down again —...
  20. A

    Two WiiM Pros with 12V trigger to multi-channel amp

    I replaced a Sonos Port with a WiiM Pro, and I'm planning to completely change my system over to using WiiM - perhaps during the next Amazon Prime sale! I have a bunch of in-ceiling speakers in my house that are powered by a 12 channel amp (https://www.htd.com/DMA-1240). Right now I have a...
Back
Top