NO sound from mini spdif?

L

LilleHerrCarl

Member
Joined
Apr 25, 2023
Messages
8
No spidf out sound from my new mini. Not even during setup. Tried all bit rates and sampling frequencies with my chord qutest, plus two slightly lesser dacs. Also tried different toslinks. All of which worked fine with other source material. Using qobuz - iPad air (5) - wiim home app - for streaming. AUX out is ok. Network signal very good. Can my mini be faulty? Any suggestions what I’m doing wrong?
 
Sort by date Sort by votes
Only one output is active at a time. Have you set the mini from aux out, that works, to optical out?

I had the same issue during setup - it defaults to aux out from the box, but gets to the digital output setup screen before giving any chance / option to change the output, so there's no sound during the test.
 
Upvote 0 Downvote
LilleHerrCarl said:
No spidf out sound from my new mini. Not even during setup. Tried all bit rates and sampling frequencies with my chord qutest, plus two slightly lesser dacs. Also tried different toslinks. All of which worked fine with other source material. Using qobuz - iPad air (5) - wiim home app - for streaming. AUX out is ok. Network signal very good. Can my mini be faulty? Any suggestions what I’m doing wrong?
Click to expand...
I would like to give you some advice. When you've sorted out the sound issue, check what @Mr Ee said, I recommend using BubbleUPnP to listen to Qobuz.
Much better and more complete than WHA
 
Upvote 0 Downvote
Maurizio said:
I would like to give you some advice. When you've sorted out the sound issue, check what @Mr Ee said, I recommend using BubbleUPnP to listen to Qobuz.
Much better and more complete than WHA
Click to expand...
Except Carl says Ipad air in the post.
Bubble is android only - but worth switching from the dark side for ;)
 
Upvote 0 Downvote
Mr Ee said:
Only one output is active at a time. Have you set the mini from aux out, that works, to optical out?

I had the same issue during setup - it defaults to aux out from the box, but gets to the digital output setup screen before giving any chance / option to change the output, so there's no sound during the test.
Click to expand...
Thanks. I never had both leads connected simultaneously. So output changes automatically. Also reinstalled many times without any progress. Test signals are mute also at CD quality. Should work at 24/192 with my gear.
 
Upvote 0 Downvote
Does it change automatically? I've never seen that! I can also change it to an output that's not connected.

There're only 3 options I can think of
It's not auto switching, so you're not actually using the optical output.
The cable isn't plugged in properly - not uncommon from previous posts.
You're very unlucky, and have a duff unit!
 
Last edited:
Upvote 0 Downvote
When you're playing qobuz via the wiim app with just the optical cable plugged in, what does it show at the bottom of the 'now playing' screen?
Aux Out, or SPDIF Out?
I'm still fixated on the output not being set correctly...!
 
Upvote 0 Downvote
Mr Ee said:
Does it change automatically? I've never seen that! I can also change it to an output that's not connected.

There're only 3 options I can think of
It's not auto switching, so you're not actually using the optical output.
The cable isn't plugged in properly - not uncommon from previous posts.
You're very unlucky, and have a duff unit!
Click to expand...
After reinstalling once more I’ve made sure it’s set at spdif with fixed volume. When I arrive at changing bit density etc there is no sound even at 48/16. Although message says operation was successful it’s still completely silent, also when graphics show samples are being played. Duff?
 
Upvote 1 Downvote
Mr Ee said:
When you're playing qobuz via the wiim app with just the optical cable plugged in, what does it show at the bottom of the 'now playing' screen?
Aux Out, or SPDIF Out?
I'm still fixated on the output not being set correctly...!
Click to expand...
Mr Ee said:
When you're playing qobuz via the wiim app with just the optical cable plugged in, what does it show at the bottom of the 'now playing' screen?
Aux Out, or SPDIF Out?
I'm still fixated on the output not being set correctly...!
Click to expand...
Reinstalled once more, now from my Samsung mobile phone with identical result! Suspecting a faulty toslink connection. Also tried a professional Lifatec Silflex glass cable which didn’t fit the optical connector of the mini, alarmingly.
 
Upvote 0 Downvote
onlyoneme said:
Can you at least see a light at the end of the bundled cable during the output setup?
Click to expand...
Interesting question. Should I be able to, if disconnected from my dac? It’s going back to the shop for a diagnosis, so back in it’s original box now. If faulty they’ll give me a replacement, so won’t bother to unpack it again. Bought unit before the Pro version was released. Anything to be gained from upgrading if my mini isn’t ok?
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

M
  • Question
No sound from Optical Out
Replies
15
Views
1K
harkpabst
harkpabst
S
  • Question
No sound coming from Wiim Mini using SPDIF
Replies
9
Views
2K
ssen
S
W
  • Question
No sound from SPDIF out.
Replies
16
Views
1K
carlinhebert
C
C
  • Question
No Sound Output
Replies
10
Views
1K
cblanks117
C
M
  • Question
SPDIF output codec - PCM - Denon M41 - No audio played
Replies
9
Views
685
Brantome
Brantome
Back
Top