Can wiim do the following? High and low passing

[alaios]

So pick the most advanced wiim device and then help me understand if the below are possible.

Can i high pass my main speakers and relieve them from having to try to go too low?
Then can I high pass (yes high pass) my sub (sub out) as these are smallish and do not got really below 40Hz. I would like also to relieve them of having to try to play 30 or 20Hz.

Are such things possible with wiim ? If yes where I can read before buying the guides/tutorials

Regards,
Alex

 

[Mr Ee]

Welcome.

Can i high pass my main speakers and relieve them from having to try to go too low?

Yes.

Then can I high pass (yes high pass) my sub (sub out

No.

However, I reckon you could apply EQ (lots of -ve gain) to the very low frequencies to essentially (somewhat) prevent them for being played.

 

[alaios]

Can you Show me a Guide on how i can apply both of your suggestions?

 

[hgo58]

Can you Show me a Guide on how i can apply both of your suggestions?

You can search for "eq" and "subwoofer" in the FAQ, available in the WiiM Home App "More" tab or here: https://faq.wiimhome.com/en/support/solutions

For example this article: "Subwoofer Advanced Options: Subwoofer Bypass Mode & Main Speakers Output Bass"

 

[Wiimer]

So pick the most advanced wiim device and then help me understand if the below are possible.

Can i high pass my main speakers and relieve them from having to try to go too low?
Then can I high pass (yes high pass) my sub (sub out) as these are smallish and do not got really below 40Hz. I would like also to relieve them of having to try to play 30 or 20Hz.

Are such things possible with wiim ? If yes where I can read before buying the guides/tutorials

Regards,
Alex

Is your sub 6.5" or smaller?

Normally you don't need a high pass on a sub, but this is an example of using PEQ.


Sorry, I just made it up as I went along. Please adjust by yourself.

 

[slartibartfast]

Wh

Can you Show me a Guide on how i can apply both of your suggestions?

Which sub do you have? It am sure it does not need a high pass filter on the input. If it can't produce 20-30Hz it won't.

 

[alaios]

Is your sub 6.5" or smaller?

Normally you don't need a high pass on a sub, but this is an example of using PEQ.

View attachment 17554
Sorry, I just made it up as I went along. Please adjust by yourself.

It is 6.5 indeed. So so I understand it right that wiim handles the eq for the Mains and the subs separately?

 

[alaios]

When measured Shows Lot of distortion. I want to high pass it

Which sub do you have? It am sure it does not need a high pass filter on the input. If it can't produce 20-30Hz it won't.