Remote for Vibelink amp

I am will BXJ on this one. WiiM flubbed this one. Who else sells an integrated amplifier in 2026 without a remote control other than niche high end audiophile brands?

The Vibelink Amp uses Bluetooth Low Energy for updating its firmware which makes me wonder if WiiM could add remote control capability through a Vibelink Amp firmware upgrade.
Who sells a power amp with a remote control?

Look at similar products with no remote:
Fosi V3 (original stereo model)
Fosi ZA3
Aiyima A20
Aiyima A70
Topping Mini 300
Aiyima A07
Douk A5
Schiit Ragnarok
Douk ST-01 Pro
Douk NS-01G Pro
Eversolo Play
SMSL A200
SMSL A01

And literally dozens more.

-Ed
 
Who sells a power amp with a remote control?

Look at similar products with no remote:
Fosi V3 (original stereo model)
Fosi ZA3
Aiyima A20
Aiyima A70
Topping Mini 300
Aiyima A07
Douk A5
Schiit Ragnarok
Douk ST-01 Pro
Douk NS-01G Pro
Eversolo Play
SMSL A200
SMSL A01

And literally dozens more.

-Ed
Huh?

Schiit Ragnarok. Jason and Mike saw the light. They added a remote control in version 2 - "Ragnarok 2 is a modular, remote-control, balanced differential integrated amplifier" from https://www.schiit.com/public/upload/PDF/ragnarok 2 manual.pdf

SMSL A200 - "Equipped with a full-featured high-quality remote control." from https://www.smsl-audio.com/portal/product/detail/id/871.html

Eversolo Play is a streaming amplifier per Eversolo. And look here a remote for it. https://www.amazon.com/Eversolo-Remote-V16-BLE-Bluetooth-Infrared/dp/B0FGXP8B44
 
Last edited:
Yes, the WiiM Vibelink Amp doesn't have a remote. It also doesn't have a phono input, it doesn't have a balance control or tone controls, it doesn't have a network streaming module, it doesn't have a display, it doesn't have a subwoofer output, it doesn't have Bluetooth audio (but it does have Bluetooth LE for switching it on and off through the WiiM Home App and for updating its firmware).

And WiiM never claimed otherwise.

Defining it as an "integrated amplifier" and then accusing it of not having mandatory features of an integrated amplifier is completely twisted logic, to say the least.

Could WiiM have provided a remote for volume control and input switching? Sure enough, they could have. They would have had to use different technology than in their other products, but they could have done it. But they didn't and they never said they would. So in the end the Vibelink Amp really is not the best device to increase the number of inputs the WiiM Ultra has to offer.

PS:
The WiiM Sub Pro and the WiiM Wake-up Light also have no remote. It's 3 out of 12 products (or 25 %). ;)
 
Last edited:
Yes, the WiiM Vibelink Amp doesn't have a remote. It also doesn't have a phono input, it doesn't have a balance control or tone controls, it doesn't have a network streaming module, it doesn't have a display, it doesn't have a subwoofer output, it doesn't have Bluetooth audio (but it does have Bluetooth LE for switching it on and off through the WiiM Home App and for updating its firmware).

And WiiM never claimed otherwise.

Defining it as an "integrated amplifier" and then accusing it of not having mandatory features of an integrated amplifier is completely twisted logic, to say the least.

Could WiiM have provided a remote for volume control and input switching? Sure enough, they could have. They would have had to use different technology than in their other producs, but they could have done it. But they didn't and they never said they would. So in the end the Vibelink Amp really is not the best device to increase the number of inputs the WiiM Ultra has to offer.

PS:
The WiiM Sub Pro and the WiiM Wake-up Light also have no remote. It's 3 out of 12 products (or 25 %). ;)
That ask for a combination of analog volume control and remote control requires either a relay-operated resistor ladder or a motorized potentiometer, both of which would increase cost quite a bit over the current, passive potentiometer, especially when choosing components that ensure high accuracy, low-level tracking/channel-matching. This is not as trivial an ask as people think.

-Ed
 
That ask for a combination of analog volume control and remote control requires either a relay-operated resistor ladder or a motorized potentiometer, both of which would increase cost quite a bit over the current, passive potentiometer, especially when choosing components that ensure high accuracy, low-level tracking/channel-matching. This is not as trivial an ask as people think.
WiiM had their reasons. Sometimes I wish they had omitted the volume control altogether. ;) Less discussions about integrated amplifiers ... and misaligned knobs. :P
 
WiiM had their reasons. Sometimes I wish they had omitted the volume control altogether. ;) Less discussions about integrated amplifiers ... and misaligned knobs. :P
You won’t read any argument from me—I’m literally using a separate DAC, a separate preamp (Topping Pre90), and one separate amp per speaker (Topping B200).

IMG_1393.jpeg

Heck, I have one streamer just for ARC or when I want lyrics on the TV (WiiM Ultra, feeding the RCA input on my preamp) and another one for critical listening of music, especially DXD and DSD (Eversolo DMP-A6 Gen 2 attached via USB to a Topping D90 III Discrete DAC, feeding the XLR input on the preamp).

IMG_1392.jpeg

I keep Pre90 set to RCA input whenever I’m not listening critically, so my wife or kids can work the entire system with just the Apple TV 4K remote and not give a damn about anything else here. When I went to listen to music properly, I switch Pre90 to XLR and turn on the Eversolo. The WiiM’s 12V trigger also manages power status for the monoblocs and subwoofer.

-Ed
 
Back
Top