Volume wheel: allow users to choose level of volume increase per rotation

[Yoku-San]

Please add an option to specify the percentage of volume increase per rotation of the volume wheel. I do not want to turn 5 times to get from 0 to 100. I guess users would really appreciate the possibility to adjust this to their taste.

 

[Mr Ee]

Only 5? Faster than mine
I requested volume change proportional to rotation speed a few months back.
Maybe it's on the radar....

 

[cooky560]

When did it become acceptable for volume to not go from min to max in one rotation?

 

[etoniolo]

Unlike adjusting the volume on the remote control which uses buttons, the volume knob can and should be faster. A mechanical potentiometer requires less than one turn to go from minimum to maximum, being a manual adjustment, it should behave in the same way.
Thank you

 

[SeeZee]

As I've said elsewhere, I'm fine with the default being conservative and slow, but would like some configurability of the step rate, including control of acceleration as well, where a quick turn produces a greater change than the same turn done slowly.

 

[Abdo]

Hello Wiim support, any news on implementing this feature.... spinning 5x... it's very annoying... get to work... implement this feature... please.

 

[Yoku-San]

When will this be implemented?

 

[Wiimer]

When will this be implemented?

There is no such feature on the roadmap at this time, but this may be added in an update this week.
------
Customizable Remote Volume Step:
Set volume step increments (1 to 5) directly from the App. The default setting is 3.

 

[QuarryHunslet]

Customizable Remote Volume Step:
Set volume step increments (1 to 5) directly from the App. The default setting is 3.

I can’t wait to set mine to 5, as the current 3 isn’t enough for me.

 

[Wiimer]

I can’t wait to set mine to 5, as the current 3 isn’t enough for me.

It would be nice if this feature were appropriate for both the remote and the volume knob.
(Of course it would.)

 

[Valentino]

I can’t wait to set mine to 5, as the current 3 isn’t enough for me.

And I cannot wait to set mine to 1 so that the remote also can be used to fine tune the sound.

Equal-loudness contour - Wikipedia

en.wikipedia.org

 

[QuarryHunslet]

And I cannot wait to set mine to 1 so that the remote it can be used to fine tune the sound.

This can already be done in the app, so the remote is better for coarse adjustment.

 

[merifon]

Also on Nad C3050LE, I have a volume knob rotation ratio shorter than a shortest gear of a mountain bike.
It's very annoying for a young boomer like me do dozens of turns and the support service seems to ignore any pleas...

 

[Abdo]

This can already be done in the app, so the remote is better for coarse adjustment.

Please tell me where this can be done in the app, because I've looked everywhere and haven't found it. And it's up to date. Thank you

 

[Wiimer]

Please tell me where this can be done in the app, because I've looked everywhere and haven't found it. And it's up to date. Thank you

I think we need to wait for the WiiM app to be updated

 

[Burnside]

I think we need to wait for the WiiM app to be updated

Are we talking about the feature we already have in the app where a tap on the volume slider increases or decreases it by 1? I don’t think there’s a setting to change that step though.

 

[QuarryHunslet]

Please tell me where this can be done in the app, because I've looked everywhere and haven't found it. And it's up to date. Thank you

Tapping either side of the volume slider will adjust the volume level in single increments.

 

[Wiimer]

Are we talking about the feature we already have in the app where a tap on the volume slider increases or decreases it by 1? I don’t think there’s a setting to change that step though.

I don't think so.

I believe this is a feature that allows one to set a minimum unit for adjusting the remote and volume knob.

 

[Wiimer]

"Customizable Remote Volume Step"

 

[Wiimer]

Are we talking about the feature we already have in the app where a tap on the volume slider increases or decreases it by 1? I don’t think there’s a setting to change that step though.

What @Abdo may be asking about is the feature you mention.