Wiim sometimes loses lyrics at low frequencies!

[lvhoag]

Hi I listen to youtube music from my tv on my wiim ultra when I turn on room fit and adjust the room sound just to make the sound sharper but the singer's voice or bass is not clear and sometimes inaudible or in other words the sentence is lost, the mid range is bright and clear. Can you tell me how to do this? When I turn off room fit the device is gone, there should be a low range that is automatically cut off, while my equalizer graph has it set to high from 50-200hz. Need an explanation!

 

[Burnside]

Please post in English

 

[slartibartfast]

Please post in English

It's in English now and still makes no sense to me.

 

[QuarryHunslet]

It's in English now and still makes no sense to me.

That could be down to Google Translate.

 

[Machiavelli]

life could be much easier if switching to another language could increase sense at the same time

 

[dangermouse]

The translation is just word salad.

@Burnside. Do you know what the original language was?

 

[Burnside]

The translation is just word salad.

@Burnside. Do you know what the original language was?

Thai or Vietnamese but I could be wrong, my short term memory isn’t great…

 

[slartibartfast]

Thai or Vietnamese but I could be wrong, my short term memory isn’t great…

It would have been Vietnamese based on other threads.

 

[dangermouse]

Thai or Vietnamese but I could be wrong, my short term memory isn’t great…

Lol, join the club.

 

[lvhoag]

Hi I listen to youtube music from my tv on my wiim ultra when I turn on room fit and adjust the room sound just to make the sound sharper but the singer's voice or bass is not clear and sometimes inaudible or in other words the sentence is lost, the mid range is bright and clear. Can you tell me how to do this? When I turn off room fit the device is gone, there should be a low range that is automatically cut off, while my equalizer graph has it set to high from 50-200hz. Need an explanation!

The Wiim sometimes loses lyrics at low frequencies!
Sr people's. It mean: Hi I'm listening to youtube music from my tv on my wiim ultra when I turn on room matching and adjust the room sound just to make the sound sharper but the singer or bass is not clear and sometimes inaudible or in other words the sentence is lost, the mid range is bright and clear. Can you tell me how to do this? When I turn off room matching the device is gone there should be a low range that is automatically cut, while my equalizer graph has it set to high from 50-200hz. Need an explanation!

 

[Wiimer]

The Wiim sometimes loses lyrics at low frequencies!
Sr people's. It mean: Hi I'm listening to youtube music from my tv on my wiim ultra when I turn on room matching and adjust the room sound just to make the sound sharper but the singer or bass is not clear and sometimes inaudible or in other words the sentence is lost, the mid range is bright and clear. Can you tell me how to do this?

Could you run RoomFit again and post a graph of your measurements here?

Also, please give us a screenshot of the RoomFit settings screen. I'm sure the expert members here will be able to look at that and give you some advice.

When I turn off room matching the device is gone there should be a low range that is automatically cut, while my equalizer graph has it set to high from 50-200hz. Need an explanation!

Sorry, I don't understand what you are saying. What do you mean by 'device is gone'? Does the device no longer appear in the WiiM app?

 

[justy]

Are your speakers wired out of phase? If you have accidentally wired one speaker so that the negative (-) terminal on the amp is wired to the positive (+) terminal on the speaker (and the positive terminal on the amp to the negative terminal of the speaker), you’ll get sound like what you’re describing. Vocals that are centered will “disappear” and bass (which is often also mono) will also be lessened because the sound waves cancel each other out when a speaker is wired incorrectly.

 

[lvhoag]

Loa cartica bãn có bĩ lịch pha khóng? Nữu cửn đã vô tình nữu dây mèt loa đì đì đìu c tc âm (-) trêm amp đìđc nõng dây vì đõng c tc âm (+) trêm loa (và đõnu c tìng đơng trính amp vì đõng c tc âm curtea loa), bãn s ⁇ nhữn đìđoùc âm thanh giêng những gì bãn đẵng mõ t. Các giòng hát ơ giữa s ⁇ “bien memt” và âm tráng (trường cũng à đờn âm) cũng s ⁇ bì giathem đì do cac sóng âm triaitt tiêu l ⁇ n nhâu khi loa đợc nòi dây không chính xá

Wow let me try

 

[lvhoag]

Could you run RoomFit again and post a graph of your measurements here?

Also, please give us a screenshot of the RoomFit settings screen. I'm sure the expert members here will be able to look at that and give you some advice.



Sorry, I don't understand what you are saying. What do you mean by 'device is gone'? Does the device no longer appear in the WiiM app?

Here is a picture of my wiim, one side I just re-ran room fit and one side I adjusted the peaks for better timbre, but the bass of the vocals have lines that are lost.

 

[lvhoag]

Are your speakers wired out of phase? If you have accidentally wired one speaker so that the negative (-) terminal on the amp is wired to the positive (+) terminal on the speaker (and the positive terminal on the amp to the negative terminal of the speaker), you’ll get sound like what you’re describing. Vocals that are centered will “disappear” and bass (which is often also mono) will also be lessened because the sound waves cancel each other out when a speaker is wired incorrectly.

I tried flipping the + and - of the left speaker and the result is the same. My left speaker consists of 2 speakers combined.

 

[hgo58]

I tried flipping the + and - of the left speaker and the result is the same. My left speaker consists of 2 speakers combined.

Your speaker setup must be symmetrical, if you want good stereo sound.

 

[Wiimer]

Here is a picture of my wiim, one side I just re-ran room fit and one side I adjusted the peaks for better timbre, but the bass of the vocals have lines that are lost.

Thank you.
From the screenshots it looks like you have too much boost. You can try the RoomFit settings values posted here.

-----
Room correction profile (created and loaded in RoomFit):
Individual Channel RoomFit,
Smoothing: 1/12,
Target: B&K,
frequency: 20Hz-300Hz,
No-Boost Mode: enabled,
Min Gain: -12dB,
Max Gain: +6dB,
Max Q: 10
The above settings enable precise correction of room- and placement- induced bass resonances.
-----

Also, could you post a screenshot of this same screenshot?

I tried flipping the + and - of the left speaker and the result is the same. My left speaker consists of 2 speakers combined.

Are the left and right speakers different models?

 

[Wiimer]

Here is a picture of my wiim, one side I just re-ran room fit and one side I adjusted the peaks for better timbre, but the bass of the vocals have lines that are lost.

Turn off the HDMI PEQ first and see if your problem goes away.

 

[lvhoag]

Cảm ơn anh.
Từ các ảnh chụp màn hình, có vẻ như bạn có quá nhiều sự thúc đẩy. Bạn có thể thử các giá trị cài đặt RoomFit được đăng đây.

-----
Hồ sơ chỉnh sửa phòng (được tạo và tải trong RoomFit):
Phòng kênh cá nhânFit,
Làm mịn: 1/12,
Mục tiêu: B&K,
tần số: 20Hz-300Hz,
Chế độ No-Boost: đã bật,
Min Tăng: -12dB,
Max Gain: +6dB,
Tối đa Q: 10
Các cài đặt trên cho phép hiệu chỉnh chính xác cộng hưởng âm trầm cảm ứng trong phòng và vị trí.
-----

Ngoài ra, bạn có thể đăng ảnh chụp màn hình của cùng ảnh chụp màn hình này không?
View attachment 26627



Loa trái và phải có phải là những mẫu khác nhau không?

The left and right speakers are identical, a pair of Sony and Bose speakers connected in parallel, but the left pair has an additional treble speaker connected in parallel.

 

[lvhoag]

Turn off the HDMI PEQ first and see if your problem goes away.

Turn off the HDMI PEQ first and see if your problem goes away.

let me try