What's your setup/configuration look like?

[EddNog]

Meow.







-Ed

 

[F1 Fan]

Ultra and a A6

 

[EddNog]

Ultra and a A6

Get the best of both worlds!

 

[BMeek]

In-your-face bass!​

My SVS1000Pro arrived, and given its relatively small sealed size for a 12" sub, this positioning on the heavy [Western Juniper] shelf sounds excellent as a 2.1 setup!

Proximity to the upstaris listening area also works - I'll see if I can configure a preset to add a bit of subwoofer gain when I'm listening in the loft (where the sub sits about 2' under the floor decking). I'll also put the SVS' grill on when I get around to better cable management. The wire running down from above is Ethernet for the WiiM Ultra.

 

[BMeek]

View attachment 35221
In-your-face bass!​

My SVS1000Pro arrived, and given its relatively small sealed size for a 12" sub, this positioning on the heavy [Western Juniper] shelf sounds excellent as a 2.1 setup!

Proximity to the upstaris listening area also works - I'll see if I can configure a preset to add a bit of subwoofer gain when I'm listening in the loft (where the sub sits about 2' under the floor decking). I'll also put the SVS' grill on when I get around to better cable management. The wire running down from above is Ethernet for the WiiM Ultra.

So I've cheerfully connected the SVS1000Pro to the Ultra's LFE output, run the Subwoofer / Main alignment and run through RoomFit with the subwoofer switch on (so much more subwoofer frequency involvement than with the Fosi SW10!). So, I'm wondering about the division of labor between the DSPs of the WiiM Ultra and the SVS subwoofer. Is there more configuration worth doing with the SVS app vs. what I've done in the WiiM app?

 

[Timmynator]

WiiM Ultra
Aiyima A70 with 48V 10A Power Supply
Sony BDP 1800 CD Transport, BR & DVD Player
Canton Chrono SL 520 Bookshelfs
Presonus Eris Sub8
Fire TV4 50"
Bee Mini PC

Extremely satisfying and budget-friendly solution for my personal small listening & viewing space.
View attachment 21572

I replaced the Presonus subwoofer with a sealed Canton Sub 601, which not only looks better with the Canton Crono SL 520 bookshelf speakers, but also sounds better to my ears – tighter and faster. The crossover frequency is now 61 Hz instead of the previous 80 Hz, and it extends the sound beautifully and seamlessly into the lower range, thanks to Roomfit. I also treated myself to an S.M.S.L PL150 CD player, which also does its job flawlessly. All of this is still budget-friendly and yet sounds fantastic.

 

[brink]

Would be great to see some pictures of your setup with WiiM product and exact audio configuration to give others some ideas and recommendations.

My living room setup, uses a Wiim Amp or Wiim mini (with a PROZOR 192KHZ DAC and Tubecube 7 amp) to power a pair of 1980 Klipsch La Scalas and a Klipsch R12SW. The power from the amps is switched with the two/one switch on the left. The powered subwoofer is switched between the Wiim mini/Wiim amp/TV with the three/one switch on the right.
My bedroom setup uses a Wiim mini (PROZOR 192KHZ DAC and HTA200 amp) powering a pair of Klipsch Forte IV speakers.

 

[CptKaos]

Ultra + Vibelink, Shanling CR60 CD transport and HTPC, with DIY HiVi Swan 3.1A's and stereo SVS SB1000Pro's


shop near field system with DIY Shadzi T3S speakers, Dayton Reference 8" subs and Fosi V3 Mono's, ZD3, ZP3 and a WiiM Pro

 

[Aquaman]

Ultra + Vibelink, Shanling CR60 CD transport and HTPC, with DIY HiVi Swan 3.1A's and stereo SVS SB1000Pro's

View attachment 35338
shop near field system with DIY Shadzi T3S speakers, Dayton Reference 8" subs and Fosi V3 Mono's, ZD3, ZP3 and a WiiM Pro

I wonder how often you want to post this again. It doesn‘t get any better by doing so.

 

[CptKaos]

I wonder how often you want to post this again. It doesn‘t get any better by doing so.

havent decided yet but I will message you when I do

 

[TonyE]

New amp.... this configuration sings... a 10 wpc amp into high efficiency wideband speakers

WiiM Ultra
Nitsch DAC
Rolls analog crossover ( for the (sub)woofers )
Parasound Zamp
Fostex FE103WK in P1000-BH cabs
DIY Pass N-channel VFET 40th Anniversary with FE22 front end
Dayton Audio MKSX4

I had to get a replacement for the FE103WK that got smoked two weeks ago..

Oh, I replaced the speaker cables, took out the Canare and put in the Kimber 8TC.

BTW- I got to do a plug in here for those speakers... with the fancy Japanese grills, those speakers cost 300 bucks for the pair... sure, they're a kit so you have to drill and install the drivers, easy stuff as the cabinets are already finished. The best crossover is no crossover at all. Madisound has them in stock.

 

[dangermouse]

I wonder how often you want to post this again. It doesn‘t get any better by doing so.

Ah! I thought it looked familiar.