slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 5,010
I am sure a lot of headphones have a 3.5 mm jack and come with a 3.5 mm to 0.25 inch adaptor.
Meet WiiM Ultra - The Digital Hub for Your Music
- Thread starter WiiM Team
- Start date
- Status
So, I connect pro to sml do200 mkii and act as preamp as well as dac. DO200 mkii uses dual 9068 chip and 5x dual opa 1612a. ASR rank this dac among the best in measurement and mid tier. The sound is in fact neutral and transparent so my silly question can wiim ultra match or outperform this?
slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 5,010
Pretty sure it can match it. Neutral and transparent is the goal.
Yes but lower quality connector plus an adaptor...6.5mm is typically standard for full size gear. 3.5mm for portables...
6.5mm is tougher socket, less prone to damage to lateral force damaging it.
And yet neither of my full size headphones have 6.5mm
In fact, the A&Ks have a 2.5mm balanced connector with a 3.5 unbalanced adapter.
Maybe rather than xlr outputs we should be petitioning for balanced headphone outputs...
Last edited:
dangermouse
Senior Member
- Joined
- Jul 25, 2023
- Messages
- 310
castalla
Major Contributor
Darko preview:
slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 5,010
I thought HD600s did have a 0.25 inch connector with a reducer to 3.5mm.Oh dear! I thought my Sennheiser HD600s were reasonably high quality.
D
Deleted member 1420
Guest
All my Sennheisers were delivered with adaptors. Sometimes tricky with a few unbalanced ones of the HD500/600 range is the 2.5 mm plug with this lock mechanism at the headphone side.
For sure some golden eared people will claim a loss of sound quality due to such adaptors
and also for sure there will be a bunch of high end manufacturers telling you their esoteric adaptors for the bargain of a few hundred Euros will solve the issue.
For sure some golden eared people will claim a loss of sound quality due to such adaptors
and also for sure there will be a bunch of high end manufacturers telling you their esoteric adaptors for the bargain of a few hundred Euros will solve the issue.dangermouse
Senior Member
- Joined
- Jul 25, 2023
- Messages
- 310
They've been around for a long time, so I assume that there have been variations over the years, but mine have with a 3.5mm plug with a 0.25" adaptor.
slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 5,010
Sounds like it. I can't imagine what a 0.25" to 3.5mm reducer looks like but it must put more stress on the 3.5mm connector. Unless there is a small piece of cable between the two parts of course.
D
Deleted member 1420
Guest
Way to cheap.
OTOH you cannot update the Ultra's built-in SPS with a $400 linear power supply, anyway. Consequently, it can never sound any good, no matter how refined the headphone adapter might be ...
D
Deleted member 1420
Guest
Way to cheap.
OTOH you cannot update the Ultra's built-in SPS with a $400 linear power supply, anyway. Consequently, it can never sound any good, no matter how refined the headphone adapter might be ...
We should blame WiiM for this C7 socket. They bar us to use the real expensive stuff. This is the most expensive C7 item my dealer offers. It would be much nicer to have the opportunity spending thousands.
(By the way, my power stuff is also a bit above entry class. But only for safety, haptic, optic and build quality. Not for sound.)
I have one somewhere.
Matterhorn
Active member
- Joined
- Jul 5, 2023
- Messages
- 102
Most high end headphones have replaceable connection cables. So using an adapter is an option rather than a necessity.
- Joined
- Oct 19, 2022
- Messages
- 1,019
Yes the screen will show you the volume level in numbers when you turn the knob up or down and fade back to the original screen. We will display more images of the UI later.
Thx for the reply. I'm curious. Can't wait
- Status
