WiiM Home App v3.0.8 Update - Dec 26, 2024

Hi!
Today I bought a umik-1, connected it to an iphone and made the correction many times.
Each time, it almost completely removes the low frequencies. When I took measurements just from my phone, there was no such thing.
 

Attachments

  • IMG_1334.png
    IMG_1334.png
    435.9 KB · Views: 36
Hi!
Today I bought a umik-1, connected it to an iphone and made the correction many times.
Each time, it almost completely removes the low frequencies. When I took measurements just from my phone, there was no such thing.
By looking at your graph, there was elevated frequency which makes them sound thick and boomy. If you got used to those and rc correct them you suddenly feel the sound lack the dynamic and punch. Thats what rc does flatten the response based on your target curve. If you did not like the outcome of rc, you could manually tweak it to your liking.
 
By looking at your graph, there was elevated frequency which makes them sound thick and boomy. If you got used to those and rc correct them you suddenly feel the sound lack the dynamic and punch. Thats what rc does flatten the response based on your target curve. If you did not like the outcome of rc, you could manually tweak it to your liking.
No, I think there's a problem. RC completely removes low frequencies. And if you do it without a microphone, then on the contrary it adds.

Obviously, this is a problem. Either in the microphone itself, or wiim is not working correctly with the microphone.
 
Does it work with LR PEQ RC or only with Stereo PEQ RC ?
I just tried on stereo rc. The changes prior to this update was the inclusion of toggle to do 3 sweeps followed by evaluation just like before. I will report back on independent rc later.
 
No, I think there's a problem. RC completely removes low frequencies. And if you do it without a microphone, then on the contrary it adds.

Obviously, this is a problem. Either in the microphone itself, or wiim is not working correctly with the microphone.
Are you using with sub or just mains? I have my setup with dual sub. With the latest app so called improved rc I don’t find bass was removed or lacking. I will run them just with speakers and see if there was a problem. Will report back later.
 
No, I think there's a problem. RC completely removes low frequencies. And if you do it without a microphone, then on the contrary it adds.

Obviously, this is a problem. Either in the microphone itself, or wiim is not working correctly with the microphone.
Well your screenshot shows that the bass is vastly elevated. If you like that then a reduction will sound bass light.
 
Are you using with sub or just mains? I have my setup with dual sub. With the latest app so called improved rc I don’t find bass was removed or lacking. I will run them just with speakers and see if there was a problem. Will report back later.
No, the system is without a sub
 
Well your screenshot shows that the bass is vastly elevated. If you like that then a reduction will sound bass light.
The fact of the matter is that the screenshot does not show the truth.
After connecting umik-1, rc thinks that I have a lot of bass. If you take measurements with your phone, it will add it instead of subtracting it.

Therefore, either the umik microphone is lying, or wiim is not working correctly with it.
 
The fact of the matter is that the screenshot does not show the truth.
After connecting umik-1, rc thinks that I have a lot of bass. If you take measurements with your phone, it will add it instead of subtracting it.

Therefore, either the umik microphone is lying, or wiim is not working correctly with it.
To check you can try to measure the response of your system using Room Equalisation Wizard. You can plug your UMIK mic into a PC and and compare it to the phone.
 
Well your screenshot shows that the bass is vastly elevated. If you like that then a reduction will sound bass light.
That’s what I said and accustomed to elevated bass level and now those were trimmed it sounded bass light. I was like that before rc but everyone is different.
 
Does it work with LR PEQ RC or only with Stereo PEQ RC ?
I tried both. On independent rc, it does 3 sweep on left and 3 sweep on right and 1 sweep for evaluation. On stereo, 3 sweeps plus 1 sweep on evaluation. So what’s the result? The independent rc outperform stereo by good margin. You will get greater soundstage over stereo but the bad thing it doesn’t support sub. Everyone is different but for me independent rc is what I like. Also in comparison with 1 vs 3 sweeps the later has improvement over 1. How do I know? I only listen to 5 songs that I know extremely well. I also notice on prior I used balanced control to get even sound on both left and right now it set on zero. I hope next update won’t ruin this nice balanced left and right.
 
Back
Top