WiiM Ultra Firmware v5.2.725647 Update - Aug 8, 2025

Please review the WiiM Ultra update release notes below. If you encounter any issues, feel free to reach out to us. This firmware update is being rolled out in stages, with devices updating sequentially over the next few days.

5.2.725647 (In Progress)

Release date:

8 / 8 / 2025

What's New:
  1. Room Correction & EQ Integration: Room Correction and EQ now work together to provide an optimized listening experience. Learn More
  2. Stabilized Wi-Fi Connection: Enhanced connection reliability, especially for mesh network environments.
  3. Screen Enhancements:
    • Corrected highlight behavior for Local Radio and Recently Played.
    • Expanded the tap area for easier Preset selection.
    • Ensured full display of Presets and Recently Played content.
  4. Amazon Music: Bitrate information is now displayed when streaming Amazon Music Prime.
  5. Sub Pro Intergartion: Improved pairing experience and overall functionality when using the Sub Pro.

Bug Fixes:
  1. Alarm Fixes:
    • Resolved an issue where weekly alarms occasionally failed to trigger.
    • Fixed a bug where only the default tone played for Pandora alarm.
  2. Dolby Audio Fixes:
    • Fixed no-sound issues when playing Dolby audio in multiroom setups.
    • Corrected volume balance behavior for Dolby audio.
  3. USB Indexing Fix: Corrected garbled character display for Chinese.
  4. USB Output Fixes:
    • Resolved no-sound issues after reconnecting a USB DAC device when using Google Cast, TIDAL Connect, Spotify Connect, or Qobuz Connect.
    • Fixed audio stuttering when playing at 44.1kHz or 48kHz sample rates.
  5. Playing Status: Corrected the playback status indicator when no music is playing.
  6. Qobuz: Now displays the correct artist name in the app during playback.
 
Last edited:
I actually like it
I am actually using it when I didn’t in the past
Ran roomfit accept it then added my eq setting and it sounds good to me 👍
Which target curve did you pick for Roomfit? I choose B&K but if there was a tilt option for EQ I would be more likely to choose flat and then add an EQ on top.
 
I actually like it
I am actually using it when I didn’t in the past
Ran roomfit accept it then added my eq setting and it sounds good to me 👍
I fully agree, it has the potential to be VERY useful. And as long as you just have one RoomFit profile it already would work nice - problems start when you have slightly more complicated setup requiring multiple room corrections (e.g. WiiM Ultra connected to wo sets of speakers via two ampfiers).
 
Which target curve did you pick for Roomfit? I choose B&K but if there was a tilt option for EQ I would be more likely to choose flat and then add an EQ on top.
Yea B&k was what I used but I haven’t messed about with it to much as previously I did not like how it sounded
Just used manual eq 😊
I will do more after I get my new speakers in 3 weeks, waste of time until then
Cannot wait to stop using the Sonos speakers tbh
 
I am very very sorry if it sounded that I am attacking you - not at all, I very much appreciate your help! I am just a bit frustrated as the much welcome feature actually broke my entire routines due to some tiny UI problem. And in fact I cannot imagine any reason for the presets (or - for the record: outputs) do not include switch for RoomFit - it is not hardware limitation as the gear is perfectly capable of having this applied (I just must apply this manually instead of via pressing button on my remote). Btw: is it anyway to revert to previous firmware and stick to this? - because in fact I would opt for this...
No problem at all🙂
Sorry, I was just joking a bit. I understand your frustrate. When I receive this FW, I will send a request ticket again.
 
Guys, maybe you would know - is there a way to setup RoomFit / EQ in such manner that it automatically equalizes loudness - i.e. if I push one band higher all other would slightly go down proportionally, so total level is unchanged?
Not that I'm aware of.
 
This update doesn't seem to be available on my WIIM. Do I wait or can I force the download?
You have to wait until it's shown as available for your device. No forced update, no manual side loading.

Guys, maybe you would know - is there a way to setup RoomFit / EQ in such manner that it automatically equalizes loudness - i.e. if I push one band higher all other would slightly go down proportionally, so total level is unchanged?
Is there any real benefit in keeping the average of all PEQ filters the same? How exactly should that average be calculated?

RoomFit now has the "Cut-Only Mode" (for as long as it hasn't been renamed to what @Wiimer suggested). It avoids a boost in any frequency range but does not attempt to give a neutral average. Wouldn't make sense with respect to digital clipping.

It's probably better to work with negative manual PEQ adjustments only, as long as the required gain range is sufficient.
 
Back
Top