slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 4,069
OK but functionality should be the same.
Presets 5-8 now available from the remote 2!
- Thread starter DariuszP
- Start date
-
- Tags
- presets wiim remote
Maybe some firmware changes on the remotes?
On my Ultra, the original remote shows up as version 53!
slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 4,069
Hmm, mine is version 41. I wonder how and when it updates. It very rarely gets used.Yes, all my Remote 1 are also 53!
They seem to be updated automatically
Please try re-pairing your remote and leaving the Amp on standby.
I connected a Remote 2 (ver 32) to Amp Ultra as a test, and 30 minutes later I looked at WHA and it had been updated to Ver 39 automatically. Double-clicking works fine.
This Remote 2 has been connected to Amp Pro since yesterday, but it didn't update automatically.
I assume from this result that perhaps the remote is auto updated by the firmware of the device?
slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 4,069
I selected "Forget Remote" then re-paired it but I didn't need to put the remote into pairing mode, it connected automatically. Should I put it into pairing mode?
It is probably fine as it is.
But I don't know if it will be updated...
slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 4,069
I have raised a ticket to ask if the Remote firmware gets updated.
slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 4,069
Well I have an answer. I left the Amp on for a while with the Remote active and now the remote is on version 53
pjorgenunes
Active member
- Joined
- Sep 2, 2024
- Messages
- 192
That version allows the double tapping for presets 5-8?Well I have an answer. I left the Amp on for a while with the Remote active and now the remote is on version 53
slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 4,069
No idea, I have no presets. Other posts say the double tapping only works for the new Remote 2.
pjorgenunes
Active member
- Joined
- Sep 2, 2024
- Messages
- 192
I confirmed and does not work…
WiiM Voiceremote 2 and WiiM Ultra also support double tapping for presets 5 to 8.
So it's definitely not limited to the WiiM Amp Ultra.
I'll be trying the old remote with the Amp Ultra later and expect this to not work. Let's wait and see ...
So it's definitely not limited to the WiiM Amp Ultra.
I'll be trying the old remote with the Amp Ultra later and expect this to not work. Let's wait and see ...
pjorgenunes
Active member
- Joined
- Sep 2, 2024
- Messages
- 192
Just to be sure... when you refer to WiiM Voiceremote 2 you're talking about this one:
Somewhere on this thread I had the (I belive wrong) idea that the first remote would work with a >version of firmware
slartibartfast
Major Contributor
- Joined
- Apr 18, 2024
- Messages
- 4,069
That's probably my fault since my remote was still on version 41 and everybody else seemed to be on 53Somewhere on this thread I had the (I belive wrong) idea that the first remote would work with a >version of firmware
My Ultra did not work..
It is possible that there were too many remotes and I was confused
I will try again tomorrow.
Thank you.
Similar threads
- Suggestion
- Suggestion
- Featured
