🎉 Introducing the Vibelink Amp – Unleash the Power of Pure Sound 🎉

Hello WiiM community! We’re thrilled to announce the launch of our latest innovation: the Vibelink Amp! Designed with your needs in mind, this 100W per channel amplifier brings high-fidelity sound and unmatched versatility to your audio setup. Perfect for passive speakers, the Vibelink Amp ensures a premium listening experience when paired with one of our streamers, with a footprint designed to match the WiiM Ultra. By leveraging its premium DAC, Vibelink Amp is also a perfect match for WiiM Mini and WiiM Pro or WiiM Pro Plus via digital input for superior sound quality.

Why Choose the Vibelink Amp?​

• 100W per channel at 8 ohms, 200W at 4 ohms: Experience powerful, distortion-free amplification for room-filling sound.
• Premium unibody aluminum design: Sleek, durable, and thermally optimized for efficient heat dissipation during prolonged use.
• High-fidelity audio with premium components: Premium DAC, amplifier, and op-amps
• Post filter feedback technology (PFFB): Overcomes speaker's load-dependency
• Bit-perfect playback (192kHz/24-bit): Achieve true audiophile performance with every note.
• Anti-Pop Noise Design: Enjoy smooth transitions across variable sample rates and bit depths without interruptions.
• Auto Standby & 12V Trigger In: Smart energy-saving features that fit modern setups.
• Pure analog input (no ADC conversion): Savor uncompromised sound quality for your favorite analog devices.
• Seamless integration with WiiM streamers: Effortlessly pairs with devices like the Ultra, Pro Plus, Pro, and Mini for high-resolution audio.

Key Features You’ll Love:​

• Hi-Res Audio Excellence: Packed with a high-quality built-in DAC ESS ES9039Q2M, one TI PCM9211 digital and analog front end, six TI OPA1612 Op-amps, and a TI TPA3255 Amp Chip, the Vibelink Amp supports up to 24-bit/192kHz high-res music allows you to optimize beloved, decades-old, high-quality audio systems or connect current speakers with your favorite platforms effortlessly.
• Versatile Connectivity: Easily connect your favorite devices with analog (RCA) or digital (optical, coaxial) inputs.
• Compact & Efficient: With a sleek, stackable design and cutting-edge thermal management, the Vibelink Amp fits right into your setup and stays cool even during marathon listening sessions.
• Easy, Secure Connections: Standard stereo banana plug output ensures a solid connection to speakers, delivering high-quality sound without signal loss or dropouts.

Why We’re Excited:

Compact Yet Powerful – A well-built, high-performance amplifier that delivers exceptional power in a sleek, space-saving design.
True Hi-Res Audio Support – Supports up to 192kHz/24-bit, ensuring full compatibility with high-resolution music services and user libraries, unlike many amplifiers that lack this capability.
Seamless Playback with No Artifacts – Effortlessly handles variable sample rates and bit depths between tracks, eliminating unwanted pops and clicks that occur in many amplifiers when audio resolution changes.

At WiiM, we’re all about listening to our community. Many of you asked for a powerful amplifier that delivers exceptional sound quality and integrates effortlessly into existing setups and we’ve been listening! The Vibelink Amp is a dedicated solution for passive speakers, designed to pair seamlessly with all WiiM streamers or as a standalone amp for your favorite gear. Whatever your setup, this amp brings the exceptional sound quality you’ve come to expect from WiiM.

The Perfect Match for WiiM Streamers​

✔ Seamless Integration – Designed for flawless compatibility with WiiM Mini, Pro, Pro Plus, and Ultra—just plug and play.
✔ Flexible Connectivity – Choose digital (Optical/Coaxial) or analog (RCA) inputs for maximum audio fidelity.
✔ Ultra-Low Latency – Perfectly synced playback for high-resolution streaming and immersive home theater sound.
✔ Studio-Grade Sound – Experience deep bass, crisp highs, and stunning clarity with bit-perfect precision.

Pair your WiiM Mini, Pro, Pro Plus, or Ultra with the WiiM Vibelink Amp and experience pure, powerful, and immersive sound like never before. Elevate your high-fidelity streaming with crystal-clear detail, deep bass, and room-filling audio.

Your music, perfected. Upgrade your setup today!

Pricing and Availability​

The Vibelink Amp will be available starting March 18th on Amazon US for $299, with international availability on its way. Don’t miss your chance to elevate your audio experience! Find out more on our website.

Let us know what excites you most about the Vibelink Amp, and share your setups! We can’t wait to hear your thoughts!

 

[F1 Fan]

Anybody using the Vibelink with 4ohm floorstand speakers?

 

[Ronnie D]

I can’t recall whether mine did, but the Vibelink manual p6 says it should come with a trigger cable.

I purchased mine in early April in the UK. No trigger cable included.

 

[harkpabst]

I can’t recall whether mine did, but the Vibelink manual p6 says it should come with a trigger cable.

Mine definitely didn't. I seem to remember we had been talking about the online manual stating otherwise ...

Anybody using the Vibelink with 4ohm floorstand speakers?

In how far does it matter if they are floorstand speakers or not?

The WiiM Vibelink Amp has no difficulties driving a pair of 4 Ω Radiant Acoustics Clarity 6.2.

 

[QuarryHunslet]

I can’t recall whether mine did, but the Vibelink manual p6 says it should come with a trigger cable.

https://gzhls.at/blob/ldb/7/3/3/4/e597ad58b89106a8201df68bef480c059566.pdf

That’s a different manual than the one linked to in the WiiM Home app. That one doesn’t mention a trigger cable included, so perhaps it is a new addition.

 

[Smartplug]

Vibelink comes with an optic cable, not a trigger, so I still don't understand why you wrote you are using the trigger furnished with the Vibelink?

Where did you think I got the trigger if not from vibe? Amazon USA comes with trigger maybe not on other country. It comes with rca, power cable, vibe, manual, trigger and optical.

 

[Smartplug]

Just a thought, do you leave the Ultra and Vibelink in standby when they are not being used? I seem to recall something about them not working properly if the power is completely removed when not in use.

I set to go on standby in 30 seconds. The previous amp that was connected via trigger works. Not sure why vibe don’t. I have to push the power button on app to turn on/off. This defeats the purpose of trigger.

 

[Ronnie D]

I set to go on standby in 30 seconds.

There are two stages of standby/ power off in the vibelink amp, even when using the trigger cable. The amp goes into a low power state of about 5 to 6 watts for a period of time before going into full standby. If you have a look at the input select led it gets dimmer when the ultra goes into standby and after time has passed the led will go off. During the first stage of standby the vibelink still looks like it is on in the WHA.

 

[Wiimer]

I set to go on standby in 30 seconds. The previous amp that was connected via trigger works. Not sure why vibe don’t. I have to push the power button on app to turn on/off. This defeats the purpose of trigger.

So have you already tried resetting Vibelink?

As @Ronnie D said, trigger off and off from the app work differently: the power button on the app is power-off (deep standby), but triggere off is standby. After a further 30 minutes, it will power off.

I think the only problem with your Vibe is that trigger on is not working properly.

 

[Wiimer]

To be honest, I don't see why Vibelink needs a standby mode at all. In my opinion, Vibe has no auto-sensing, no Wi-Fi and no Remote, so standby mode is unnecessary.

It would be better to change the specification so that the power is turned off directly by the trigger

 

[Ronnie D]

Not sure why vibe don’t

Okay, having thought about your issue further, I think the very first update on the amp was to allow the trigger cable to work correctly.
On your Wiim home app, do you have an arrow on the amp panel? If so, that will be a download update. If not could you unplug your amp from the power for a couple mins and have a look again? I recall that @harkpabst had mentioned this.

 

[Ronnie D]

That one doesn’t mention a trigger cable included, so perhaps it is a new addition.

I think the early releases of the amp included the trigger cable, but then was removed although it could be country specific.

 

[Smartplug]

Okay, having thought about your issue further, I think the very first update on the amp was to allow the trigger cable to work correctly.
On your Wiim home app, do you have an arrow on the amp panel? If so, that will be a download update. If not could you unplug your amp from the power for a couple mins and have a look again? I recall that @harkpabst had mentioned this.

During initial setup it update right away, there was no note what the update was.

 

[Smartplug]

To be honest, I don't see why Vibelink needs a standby mode at all. In my opinion, Vibe has no auto-sensing, no Wi-Fi and no Remote, so standby mode is unnecessary.

It would be better to change the specification so that the power is turned off directly by the trigger

I like the idea of trigger will turn off the vibe instead of standby. The vibe turn itself of after a while as I see the app no longer on. This how trigger should work instant off when ultra goes on standby.

 

[telecastermds`]

I just bought a Vibelink and it came with a trigger cable in the box

 

[Smartplug]

I just bought a Vibelink and it came with a trigger cable in the box

Did you get it from Amazon USA?

 

[QuarryHunslet]

I set up a new Ultra, and Vibelink yesterday for a family member, and there was definitely no trigger cable supplied in Amazon UK stock.

 

[Ivan]

Bought through Amazon Italy and no trigger included.
And, it's something often mentioned also here, the lack of a very very cheap cable.

 

[Smartplug]

I set up a new Ultra, and Vibelink yesterday for a family member, and there was definitely no trigger cable supplied in Amazon UK stock.

Could it be the first batch from production comes with trigger? Maybe the new batch don’t come with it? Mine came with trigger.

 

[QuarryHunslet]

Could it be the first batch from production comes with trigger? Maybe the new batch don’t come with it? Mine came with trigger.

My own Vibelink is a very early one, and that didn’t have a trigger cable supplied in the box, nor even mentioned in the instructions.

Perhaps the trigger cable is only supplied to the US market.

 

[Smartplug]

My own Vibelink is a very early one, and that didn’t have a trigger cable supplied in the box, nor even mentioned in the instructions.

Perhaps the trigger cable is only supplied to the US market.

I got mine in Amazon USA in time of prime day. It does come with trigger and even the manual states what comes in the box. Wiim packaging are among the best out there despite it’s affordable price. In comparison with jc1 mono block which cost 20k. In term of dynamic jc1 would drive any power hungry speakers known to man with authority. My ear would bleed with jc1 sheer power and volume. Vibe I find it lack in volume even I set it to max. I’m getting 200 watt since my speakers are 4 ohms. It’s 85 percent performance of the jc1.