RoomFit different results (bass questions)

[gasolin75]

Wiim amp pro and dayton usb mic

I seem to get different results most of the time i run room fit also depending on lower limit i choose for bass adjustmenets

Is that normal ?

what limit in the bass should have use when my sub is rated at 35 hz

20-30/35hz should be to much peaks, and or null or any problems since most music don't have that deep bass and my sub wont play it loud enough to be a problem

 

[gasolin75]

audio pro addon sub

This song 85% limit 100% volume i can have 3-4 db more but it's not like it has to be that louder but more enhancement of the bass under 40hz using the settings in #12

This song a couple of db but as mentioned its like around 35-40hz not all of the frequency range my sub plays

 

[gasolin75]

I have now tried some adjust efter posting the thread and my smallest sub now play bass i didn't expect it to be able to

Have a bigger sub but it's up for sale

It now plays alot more noticeable bass with slamm

normal setting and volume when doing room fit my slightly bigger sub (both 8") i ended up turned it down by 6 db, since i thought it was to much in the room and my older smaller sub i used at 0 db (same room amp and mic).

At -6 db the bass from mig bigger sub is good and can be loud but my older smaller sub sounded more discrete at 0 db compared to the other sub at -6db. now it sounds like it exceeds the bass at 0 db from the other sub i always used at -6db, i did ad a medium havey dostop to the top of my sub so it's playing without shaking/vibrating as much

Just the opposite the smaller sub now sound biggest even when it's still is at 0db compared to the other sub at -6db

85 volume limit, 85db sensitive speaker, x over 60hz

This is how it my frequency repsonce is -5 db at 40hz and -10d at 34-35 hz, -6db at 56hz was what some review measured my speakers to. 16-18 hz lower extention before it's down by -6db. Later i will try to se if i can get it to -5 db at 35hz or 30hz at -10db, that could be the limit of my compact 8" sub (150 watt) if still wanna play loud, lower extention then enhansing the bass so it's louder then everything else (it already feels very loud even when it's only flat down to 44-46 hz

 

[harkpabst]

Well ... can you post a screenshot of the RoomFit process showing that the Dayton Audio mic is really used? Did you upload the calibration file?

Do we already know for sure the make and model of your old sub and your new sub and which one is in use right now?

 

[gasolin75]

yes i use the calibration file

Audio pro addon sub it look like the lates sw-5 but is the older version with lfe and stereo input tyhe new only has lfe in

krks8.4 it's bigger more balls but at -6 db my audio pro now beat it at 0db the krk sub is about 40-50% bigger (i guess)

Have it at 35hz limit but i guess i could try 30hz to se what result i would get