Roomfit results

F1 Fan

Senior Member
Joined
Mar 17, 2024
Messages
230
Location
United Kingdom
Hi all,

As the wife is out today I thought would start playing around with Roomfit .. What your thoughts on these results and is there anything obvious that I could do to technical improve the results?

Thanks for any help / assistance..

IMG_9648.png
 

Attachments

  • IMG_9649.png
    IMG_9649.png
    39.2 KB · Views: 18
  • IMG_9650.png
    IMG_9650.png
    45.3 KB · Views: 18
As the wife is out today I thought would start playing around with Roomfit
I am also waiting for a timeslot to rerun my roomfit when family is away. I got some suggestions that were kindly shared by one of the experts.

I don't know enough so will wait for the experts to comment on this thread. It may help if you share your setup details i think. I guess +/- 3db differences from the target isn't bad in general based on my understanding, hope wiim will show what's a reasonable margin in the graph some day.
 
I am also waiting for a timeslot to rerun my roomfit when family is away. I got some suggestions that were kindly shared by one of the experts.

I don't know enough so will wait for the experts to comment on this thread. It may help if you share your setup details i think. I guess +/- 3db differences from the target isn't bad in general based on my understanding, hope wiim will show what's a reasonable margin in the graph some day.
My setup details are in my signature.. Room is 5m x 4m
 
It looks promising!

The phone's built-in microphone might not be picking up the subwoofer's low frequencies, but there don't seem to be any major peaks or dips. As is often recommended, I suggest setting the frequency range to 20Hz-300Hz and trying a moving microphone measurement.
 
It looks promising!

The phone's built-in microphone might not be picking up the subwoofer's low frequencies, but there don't seem to be any major peaks or dips. As is often recommended, I suggest setting the frequency range to 20Hz-300Hz and trying a moving microphone measurement.
Thank you, I’m using a Umik-1
 
I’ve re run based on your suggestions..
 

Attachments

  • IMG_9654.png
    IMG_9654.png
    43.8 KB · Views: 30
  • IMG_9650.png
    IMG_9650.png
    45.3 KB · Views: 25
  • IMG_9651.png
    IMG_9651.png
    39.6 KB · Views: 25
  • IMG_9652.png
    IMG_9652.png
    47.3 KB · Views: 23
  • IMG_9653.png
    IMG_9653.png
    35.2 KB · Views: 20
And my final attempt today :)
That looks pretty good to me. Good job!

Perhaps there might be some room to improve subwoofer integration by tweaking speaker/sub delay and/or crossover frequency in WHA, but it is by no means necessary and might not even make that much of a difference.
There's also a dip just below 100Hz which looks like it might be an SBIR notch, but it is narrow so may not be that audible in practice. How far are your speakers from the wall behind them?

And most importantly, how does it sound to you?
 
Back
Top