I recently acquired an Amp Ultra and a pair of Audio Pro A10 Wiim editions to use as surrounds for a TV setup. These are my first Wiim devices so it took me a bit to build up some familiarity with the app and how to play with the customization options but I feel pretty comfortable after a few days of use at this point. I got everything setup using a pair of bookshelf speakers for the front and the A10s as surrounds but noticed that when Dolby is activated I'm able to adjust the EQ but the settings don't take effect on the devices. I've tested this using both the Arc and optical connections and they both behave the same. If I deactivate Dolby the EQ setting do get applied however the front speakers return to a L/R setup and lose the phantom front center arrangement and the surrounds return to L/R from SL/SR which is less desirable. My objective is to adjust the EQ to become more dialog friendly when using for TV while preserving the Front and Surround arrangements so any advice would be appreciated.
Additional observations
- Changing the EQ on all 3 devices has no impact on sound with Dolby activated
- No difference when using EQ presets or manual adjustments
- Turning EQ off/on has no impact on sound with Dolby activated
- Adjusting EQ with Dolby off will apply changes but settings don't remain applied when activating Dolby again
- When Dolby is active the VU meter on the display screen shows no activity but does once deactivated (not a concern just an observation)
- Rebooting devices had no impact
Additional observations
- Changing the EQ on all 3 devices has no impact on sound with Dolby activated
- No difference when using EQ presets or manual adjustments
- Turning EQ off/on has no impact on sound with Dolby activated
- Adjusting EQ with Dolby off will apply changes but settings don't remain applied when activating Dolby again
- When Dolby is active the VU meter on the display screen shows no activity but does once deactivated (not a concern just an observation)
- Rebooting devices had no impact