What speakers are you using?
- Thread starter Steve Woodhouse
- Start date
EddNog
Major Contributor
Interesting that this forum doesn’t allow editing posts once they’re past a certain age.
Rearranged my rack, cleaner looking now.
-Ed
Rearranged my rack, cleaner looking now.
-Ed
See
Post in thread 'Ability to edit my own posts'
https://forum.wiimhome.com/threads/ability-to-edit-my-own-posts.6384/post-108326
Danny Linguini
Member
- Joined
- Nov 30, 2024
- Messages
- 62
Just for giggles, a 6-month update on my Paradigm Monitor SE 6000F’s …. So I got these back in December (at a very good price, it turns out), and first reported them here in January. At first I needed WiiM’s EQ to get them sounding where I wanted them. I don’t crank them up every day, maybe just a few times a week, so what I think is happening is they’re finally actually getting broken in. It started a few weeks ago, when I noticed everything getting very bass-y, as every listen I found myself adjusting the lower bands to less and less boost, until there’s now barely any. Still a little, because I like it punchy, but nowhere near what’re it was originally. More recently, like this past week, I found myself needing to make the same adjustments on the high bands. Where I previously needed that boost to get them sounding as crisp as I like, they’ve very suddenly become a little too bright. I’ve never had speakers change that much over the course of time, but it’s been a very pleasant surprise hearing them ‘come alive’.
I actually turned the EQ completely off for a bit yesterday, but I found I still preferred that little extra boost. Probably because I listen to a lot of 70’s and 80’s stuff that just doesn’t have the same zip as newer stuff. I’m not that anal about needing to reproduce it as the artists originally intended, I want it to move me like I want to hear it. But even so, I’m still hearing details in a lot of this work that I don’t remember hearing before, which is almost as cool as experiencing it for the first time.
Anyway, bottom line is, I’m loving these speakers with the Amp Pro, and very much looking forward to hooking them up to an Amp Ultra, which I hope will be very soon. More to come …
I actually turned the EQ completely off for a bit yesterday, but I found I still preferred that little extra boost. Probably because I listen to a lot of 70’s and 80’s stuff that just doesn’t have the same zip as newer stuff. I’m not that anal about needing to reproduce it as the artists originally intended, I want it to move me like I want to hear it. But even so, I’m still hearing details in a lot of this work that I don’t remember hearing before, which is almost as cool as experiencing it for the first time.
Anyway, bottom line is, I’m loving these speakers with the Amp Pro, and very much looking forward to hooking them up to an Amp Ultra, which I hope will be very soon. More to come …
EddNog
Major Contributor
Just an update on my true stereo 2.2 setup with a pair of LS50 Metas crossed over to a pair of SVS 3000 Micros at 150Hz (my, “poor man’s Blade Meta,” setup). Installed a miniDSP Flex between my laptop and my Luxsin X9 (which is handling DAC, bass management and volume control duties). After performing DIRAC calibration, I recorded the below combined, left, and right response sweeps using HouseCurve. The sound is absolutely sublime. Now that I have the miniDSP performing room correction (instead of relying on the DIRAC Processor software in my laptop), I’ll probably swap my WiiM Ultra back in as source (configured bit-perfect).
-Ed
-Ed
Last edited:
EddNog
Major Contributor
Even my cat loves the sound! 
-Ed
-Ed
- Joined
- Mar 2, 2024
- Messages
- 2,474
I have a pair of Bi-Wired Tannoy 615 floor standing speakers connected to my WiiM Amp Ultra.
I have owned these speakers from new, back in the early 1990s, and they were originally connected to my Quad 44/405-2.
The Quad developed a fault many years ago (approximately 15 to 20 years ago), and the speakers had remained dormant in a darkened room ever since, until February this year when I connected my WiiM Amp to them and they awoke from their slumber, and spoke again.
Since the arrival of the WiiM Amp Ultra, my WiiM Amp has returned to use in my bedroom, where it is well suited.
Here is a link I found giving details of the Tannoy 615 speakers for those who might be interested.
I have owned these speakers from new, back in the early 1990s, and they were originally connected to my Quad 44/405-2.
The Quad developed a fault many years ago (approximately 15 to 20 years ago), and the speakers had remained dormant in a darkened room ever since, until February this year when I connected my WiiM Amp to them and they awoke from their slumber, and spoke again.
Since the arrival of the WiiM Amp Ultra, my WiiM Amp has returned to use in my bedroom, where it is well suited.
Here is a link I found giving details of the Tannoy 615 speakers for those who might be interested.
Skull
Major Contributor
- Joined
- Jun 20, 2024
- Messages
- 875
How’s it sound compared to the quad?
Wiim system 1 (Pro Plus through Naim NAIT 50 - principally my vinyl replay system) through Polk Audio ES55 Foorstanders. Lovely rich bass and while not perhaps in the NAIT's league the combo of vinyl and 56 year old ears make this less critical these days.
Wiim system 2 (Ultra into Cyrus One Cast - for Roon lossless) plays through a pair of Dali Spektor 2 bookshelf speakers. Lovely system that is used principally for streaming.
I also have a Naim Uniti Atom running a pair of Kef LS50 Metas in my "man cave/studio" in the garden. This is a mixed system which plays vinyl, streaming and occasionally home theatre (in stereo). Great speakers but overpriced in my opinion.
Wiim system 2 (Ultra into Cyrus One Cast - for Roon lossless) plays through a pair of Dali Spektor 2 bookshelf speakers. Lovely system that is used principally for streaming.
I also have a Naim Uniti Atom running a pair of Kef LS50 Metas in my "man cave/studio" in the garden. This is a mixed system which plays vinyl, streaming and occasionally home theatre (in stereo). Great speakers but overpriced in my opinion.
- Joined
- Mar 2, 2024
- Messages
- 2,474
I don't know, I haven't heard the Quad for approximately 15 to 20 years.
Something went pop, and there was a small puff of smoke, so the power plug was pulled straight away, and I haven't investigated since.
There is also an issue with my Quad FM4 tuner, and my Linn Sondek LP12, and my Philips CD-960 that were all connected to the Quad 44.
Skull
Major Contributor
- Joined
- Jun 20, 2024
- Messages
- 875
Eeek expensive smokeI don't know, I haven't heard the Quad for approximately 15 to 20 years.
Something went pop, and there was a small puff of smoke, so the power plug was pulled straight away, and I haven't investigated since.
There is also an issue with my Quad FM4 tuner, and my Linn Sondek LP12, and my Philips CD-960 that were all connected to the Quad 44.
- Joined
- Mar 2, 2024
- Messages
- 2,474
Yes, I would think so. I'm not sure which Quad item went pop, the FM4 issue was a flickering display, and failing to store station presets (battery backup?). The Linn Valhalla board and power button I think, and the Philips CD player needs new belts at least for the drawer load mechanism.Eeek expensive smoke
Skull
Major Contributor
- Joined
- Jun 20, 2024
- Messages
- 875
Such a shameYes, I would think so. I'm not sure which Quad item went pop, the FM4 issue was a flickering display, and failing to store station presets (battery backup?). The Linn Valhalla board and power button I think, and the Philips CD player needs new belts at least for the drawer load mechanism.
- Joined
- Mar 2, 2024
- Messages
- 2,474
I may do something with them someday.Such a shame
reniro
Member
- Joined
- Mar 25, 2025
- Messages
- 24
i am using the Bang & Olufsen Beolab 8000 active speaker which I rescued from a cellar. Luckily it was a dry one. They were sold really cheap and I got lucky to get a pair which doesn't had destroyed circuit boards and voltage converter. But they suffer from rotten insulation material (which all the 8000 have). So I´ve done a total clean up with alcohol, replaced the cables which much better ones (silver) and higher cable diameter. Bought some great cinch cables from a B&O specialist and landed (after two other Streamer) with my Wiim Ultra in this forum 
)
Replaced the black fabric cover with much nicer oak wood panels ...
I´m really happy with my setup. The speakers sound relatively "warm" and rich. Build in the 90s and you can hear that. Not that "digital" and super cold clear as newer speakers and that's a characteristic I really appreciate. They are very resolution dependent and you can hear a huge difference between Spotify 320 kbps, 16bit and 192kHz Flac or DSD-Files ... At the moment I´m using a Teufel Subwoofer which is fine but nothing special. But I want to change to the mighty B&O Beolab 2 Subwoofer for better sound and that famous look and overall very small footprint/size.
At the moment I´m working on the top position tweeter lens mod (same position and look like the Beolab 18´s) for better room sound and I designed a new much more modern stand for the "organ pipes". It will be cnc´d out of one piece of aluminium.
All in all I am really happy with my setup. I always loved these iconic speakers and they sound great and at the same time you have some "art" in your living room. Never thought of having B&O speaker because of the price but you can get lucky on the used market For me the Beolab 18´s are one of the most beautiful speakers and I'm trying to match the design of these 8k speakers.
)Replaced the black fabric cover with much nicer oak wood panels ...
I´m really happy with my setup. The speakers sound relatively "warm" and rich. Build in the 90s and you can hear that. Not that "digital" and super cold clear as newer speakers and that's a characteristic I really appreciate. They are very resolution dependent and you can hear a huge difference between Spotify 320 kbps, 16bit and 192kHz Flac or DSD-Files ... At the moment I´m using a Teufel Subwoofer which is fine but nothing special. But I want to change to the mighty B&O Beolab 2 Subwoofer for better sound and that famous look and overall very small footprint/size.
At the moment I´m working on the top position tweeter lens mod (same position and look like the Beolab 18´s) for better room sound and I designed a new much more modern stand for the "organ pipes". It will be cnc´d out of one piece of aluminium.
All in all I am really happy with my setup. I always loved these iconic speakers and they sound great and at the same time you have some "art" in your living room. Never thought of having B&O speaker because of the price but you can get lucky on the used market
For me the Beolab 18´s are one of the most beautiful speakers and I'm trying to match the design of these 8k speakers.Attachments
Last edited:
At least Quad still repair all of their ancient stuff.I may do something with them someday.
- Joined
- Mar 2, 2024
- Messages
- 2,474
The 405 has already been back to Huntingdon over 30 years ago for a repair, which turned out to be a bridging rectifier, and while it was there I got them to do the full upgrade to the 405-2 specification.
If I was to send all three items back for repair / servicing, it would no doubt be quite expensive, but if I then decided to sell them, would I get sufficient money for them to make it worthwhile.
I am driving B&W CM1 bookshelf speakers (plus an ASW610XP sub at 80Hz crossover) with my Wiim Amp Pro. The CM1s are relatively insensitive speakers (84dB).
I tried them with a Wiim Amp (which is on kitchen wall speaker duty), but the bass sounded a bit muddy and I thought I heard distortion at higher volumes. The Wiim Amp Pro felt much more controlled - presumably due to the PFFB - and I’m very happy with its performance with this setup.
I tried them with a Wiim Amp (which is on kitchen wall speaker duty), but the bass sounded a bit muddy and I thought I heard distortion at higher volumes. The Wiim Amp Pro felt much more controlled - presumably due to the PFFB - and I’m very happy with its performance with this setup.
Looking at the combined response I could guess there is some combing cancellation, due to reflected wavelengths correspondingly to 4 times the distance from the back wall. Give the frequency I roughly calculated about 42cm.You could try to reduce the distance of speakers from the back, inserting in the meantime the supplied port plug to avoid bass response increase. A possible position could be over the subs. Obviously a new set of Dirac measurement will be needed but likely the combing effect should be reduced. I have the same speakers and for the same reason I put them about 10cm from the back wall and with theirs plug, the bare response it's flat and Dirac has less holes to correct.
Let we know...
