WiiM Home App v3.2.4 Update – Jun 19, 2025

Please review the app update release notes below. If you encounter any issues, feel free to reach out to us.

App Release Version
v3.2.4

* Note: The Android app is currently under review by Google Play.

What’s New:

1. Playback Screen Styles: Added 3 new styles with large titles on device displays.
2. Full Track Titles (iOS): Now shown for KKBox, NAS, USB, Samba, Local Music, and Qobuz.
3. Serviio Support: Improved media browsing via NAS indexing.
4. Preset/Alarm Limit: Increased to 32 (requires upcoming firmware update).
5. TIDAL Enhancements: Added filters for "My Tracks" by artist/album and support for adding full albums to playlists.
6. Parametric EQ Update: Added Low-Pass and High-Pass filters to the 10-band PEQ (firmware update required).
7. USB Indexing: Estimated scan time now shown during USB content indexing.
8. App Preferences (iOS): Option to keep screen always on.

Bug Fixes:

1. Fixed Korean translation issues.
2. Resolved Dolby 5.1 channel display bug (iOS).
3. Fixed crashes and playback issues related to MinimServer indexing and IP changes.
4. General stability and performance improvements.

 

[Wiimer]

. Also I am assuming existing RC profiles will be added to the new RC profiles list when the new feature is finally available in the app.

Yes, you are right.

However, I remember that in the first beta version the behaviour was a bit strange: if I had already manually edited a PEQ created in RC, it was not moved to the RC profile list, but remained as a PEQ.

Perhaps the team spent some time trying to get this to work correctly?

 

[harkpabst]

I wonder if it is possible to have the room correction working on top of an existing PEQ set.

I remember that initially, there have been cases where EQ was not disabled prior to running the measurements. Back then this was commonly judgesdto be an error.

However, my most important use case would be exactly that:

1. Apply a set of PEQ filters to optimise the speakers' anechoic response (based on my own measurements or e.g. taken from Spinorama.org data).
2. Run RC (within a limited frequency range, e.g. 20 Hz - 350 Hz) with the above filter set still applied.

I can only repeat myself, this is exactly the flexibility that Lyngdorf amps give me. They provide no less than 4 layers of EQ:

1. Speaker EQ (for optimising speaker response)
2. RoomPerfect (their room correction system)
3. Voicings (adjust the sound to your mood or the programme material)
4. One treble and one bass control (with adjustable gain and center frequency)

All these stages are optional, of course, but they can be assigned in any combination you like. Brilliant!

 

[TimWiim]

I wonder if it is possible to have the room correction working on top of an existing PEQ set.

I remember that initially, there have been cases where EQ was not disabled prior to running the measurements. Back ten this was commonly judges to be an error.

However, my most important use case would be exactly that:

1. Apply a set of PEQ filters to optimise the speakers anechoic response (based on my own measurements or e.g. taken from Spinorama.org data).
2. Run RC (within a limited frequency range, e.g. 20 Hz - 350 Hz) with the above filter set still applied.

I can only only repeat myself that this is exactly the flexibility that Lyngdorf amps give me. They provide no less than 4 layers of EQ:

1. Speaker EQ (for optimising speaker response)
2. RoomPerfect (their room correction system)
3. Voicings (adjust the sound to your mood or the programme material)
4. One treble and one bass control (with adjustable gain and center frequency)

All these stages are optional, of course, but they can be assigned in any combination you like. Brilliant!

Yes, agreed exactly this is what’s required.

 

[canard]

I wonder if it is possible to have the room correction working on top of an existing PEQ set.

I remember that initially, there have been cases where EQ was not disabled prior to running the measurements. Back ten this was commonly judges to be an error.

However, my most important use case would be exactly that:

1. Apply a set of PEQ filters to optimise the speakers anechoic response (based on my own measurements or e.g. taken from Spinorama.org data).
2. Run RC (within a limited frequency range, e.g. 20 Hz - 350 Hz) with the above filter set still applied.

I can only only repeat myself that this is exactly the flexibility that Lyngdorf amps give me. They provide no less than 4 layers of EQ:

1. Speaker EQ (for optimising speaker response)
2. RoomPerfect (their room correction system)
3. Voicings (adjust the sound to your mood or the programme material)
4. One treble and one bass control (with adjustable gain and center frequency)

All these stages are optional, of course, but they can be assigned in any combination you like. Brilliant!

for your "4"
a good old adjustable physiological filter would perhaps often be useful...
"yamaha fashion"
(but the absence of autogain remains)
;-)

 

[Wiimer]

I wonder if it is possible to have the room correction working on top of an existing PEQ set.

I remember that initially, there have been cases where EQ was not disabled prior to running the measurements. Back ten this was commonly judges to be an error.

However, my most important use case would be exactly that:

1. Apply a set of PEQ filters to optimise the speakers anechoic response (based on my own measurements or e.g. taken from Spinorama.org data).
2. Run RC (within a limited frequency range, e.g. 20 Hz - 350 Hz) with the above filter set still applied.

I can only only repeat myself that this is exactly the flexibility that Lyngdorf amps give me. They provide no less than 4 layers of EQ:

1. Speaker EQ (for optimising speaker response)
2. RoomPerfect (their room correction system)
3. Voicings (adjust the sound to your mood or the programme material)
4. One treble and one bass control (with adjustable gain and center frequency)

All these stages are optional, of course, but they can be assigned in any combination you like. Brilliant!

Is that a request to the team?

Unfortunately not at the moment, EQ is disabled when you run RC, I think you can do it if connect 2 WiiMs in series

 

[harkpabst]

a good old adjustable physiological filter would perhaps often be useful...
"yamaha fashion"

I admit, I never was a big fan, I prefer to crank up the volume whenever it's possible . I acknowledge that this feature has been requestes several times, so it should be taken seriously. In my personal view the usefulness is overrated and I gave my reasoning occasionally, e.g. here:

Post in thread 'Loudness mode (Equal-loudness contour, or Fletcher–Munson curves)'

Jan 31, 2024

I don't see how this isn't possible on the wiim amp. Sure it's kinda pointless in the wiim mini, pro and pro plus, but with the wiim amp, the amp is the only device between the music and the speakers, so a loudness feature becomes more interesting.

It cannot be hard to implement effectively with modern equipment, one my older amplifiers is a 1972 sherwood s7200 and it has a loudness control that works just fine at low volumes, and correctly modifies the sound less as the volume increases, all without the benefit of a DSP or processor.

Some Yamaha amps even have a variable...

• harkpabst

• 

but the absence of autogain remains

True.

Is that a request to the team?

Well, if it was I had picked the wrong sub-forum, I guess. There have been a number of requests concerning these topics. I'll have to review them once again and decide on starting a new feature request. But not today. I have to clean some records.

 

[adias]

Will there be a Radio section on the WHA as there is on the Ultra screen?

 

[Burnside]

Will there be a Radio section on the WHA as there is on the Ultra screen?

The same sections are there, just not under one menu viz.
Post in thread 'WiiM Ultra Firmware v5.2.718554 - May 30, 2025'
https://forum.wiimhome.com/threads/wiim-ultra-firmware-v5-2-718554-may-30-2025.7359/post-129506

 

[adias]

The same sections are there, just not under one menu viz.
Post in thread 'WiiM Ultra Firmware v5.2.718554 - May 30, 2025'
https://forum.wiimhome.com/threads/wiim-ultra-firmware-v5-2-718554-may-30-2025.7359/post-129506

It doesn’t seem to be the same lists in my case.

 

[Burnside]

It doesn’t seem to be the same lists in my case.

Do you have a TuneIn account linked to your WiiM?

 

[adias]

Do you have a TuneIn account linked to your WiiM?

Yes

 

[adias]

The latest ultra fw broke my screen settings. I have the screen off and now the screen turns on between tracks briefly.

I am also getting stuttering with Qobuz connect. Feedback sent.

It seems that with each new FW update more bugs creep up. Featuritis us a bad practice in software development. Keep it simple…

 

[Burnside]

Yes

Strange then as I would have thought the first two levels would have been the same given they’re account based.