Ongoing Beta Beta Test: Simultaneous USB out and Sub out

Jose said:
Is the "Speakers/Sub sync" issue mentioned above something that can be manually fixed by setting a "time delay" parameter to the subwoofer or main speakers? Or is it something more complex that cannot be fixed by manual parameterization?
Click to expand...
I switched the output to spdif and then set the speakers/sub sync and switched the usb output back.
 
wkamil said:
I switched the output to spdif and then set the speakers/sub sync and switched the usb output back.
Click to expand...
Did this work?

I could see there being a difference potentially between USB versus S/PDIF. For example, on my Geshelli JNOG3, the USB has to pass through the Amanero USB module in the DAC before conversion, whereas coax bypasses that, so, in theory, there could be a tiny difference in timing between the two. Hard to say if any factors exist architecturally with the WiiM itself, too.

-Ed
 
EddNog said:
Did this work?

I could see there being a difference potentially between USB versus S/PDIF. For example, on my Geshelli JNOG3, the USB has to pass through the Amanero USB module in the DAC before conversion, whereas coax bypasses that, so, in theory, there could be a tiny difference in timing between the two. Hard to say if any factors exist architecturally with the WiiM itself, too.

-Ed
Click to expand...
Therefore I hope it will be fixed in final FW.
 
wkamil said:
I can confirm. Speakers/Sub sync is broken when USB out is active (SPDIF works). I sent ticket in the app.
Click to expand...
Hi wkamil,

Thanks very much for your feedback. We will release a new beta firmware to solve this issue this week.
 
after a few days of using the Beta it's time to express some feelings about it. As already said it is not possible to calibrate the delays automatically because the subwoofer sweep takes too long to be emitted. As for the SQ I can say that I have the impression that the stage has narrowed a lot in the central area. It seems that the separation between the channels is less than usual making the image not very wide with narrow sound planes and reduced to a smaller area between the speakers. Obviously these tests were done under the same conditions. Always with the same external DAC with the only difference of the firmware version and obviously the subwoofer. Has anyone else had the same impressions?
 
WiiM Team said:
Hi WiiM Community,

We are seeking beta testers for the simultaneous USB Out and Sub Out feature, available exclusively on WiiM Amp, WiiM Amp Pro, and WiiM Ultra.

How to join this Beta?

If you are interested in beta testing this new feature, please provide your Wiim Forum username and MAC address in the Beta Test link.

Thanks!
WiiM Team
Click to expand...
Just submitted my form! Excited to get the update and test.
 
With the latest update released today, 5.2.640252 and wiim app for iOS 3.08 (Android 3.07 and 3.08 the same), if I try to start a song on my Plex server, in the internal network, it doesn't start, the song becomes very slow and then the wiim seems to disconnect from the internal network. Is a fw rollback possible? Thanks and happy holidays
 
kirkoff said:
With the latest update released today, 5.2.640252 and wiim app for iOS 3.08 (Android 3.07 and 3.08 the same), if I try to start a song on my Plex server, in the internal network, it doesn't start, the song becomes very slow and then the wiim seems to disconnect from the internal network. Is a fw rollback possible? Thanks and happy holidays
Click to expand...
Have you tried turning it off and on again? Removing power not just standby.
 
AshikIbrahim said:
Great just before new year eve.. what a team ! ThanksI will test and revert
Click to expand...
Guys I have tested it.. simply fantastic..usually I get a delay in av sync for microseconds with any other outputs but usb out has no sync issues at all. Also the sub out calibration went well and aligned well. The issue i am facing now is an old one could you please check on this for optical inputs with teh beta firmware ?
P

Thread 'Wiim Amp turns off the sound after 15 seconds HDMI, Optical'

Hello. Overall, I am satisfied with Wimm Amp, it is a very good device but it has one small problem.
I have my laptop connected to the TV via an HDMI cable and the TV connected to the Wiim Amp via HDMI ARC.
If the laptop does not play any sound, Wiim Amp turns off the audio signal completely after 15 seconds and then when I turn on a song, about 2 seconds of silence pass before Wiim Amp activates the audio signal again. Similarly, you cannot hear any system notifications because they are so short that the Wiim Amp does not even have time to activate the audio signal.
This is also very...
  • Like
 
I got the beta, i restarted the Ultra. But it works good a while. And then sound disappeared. I needed to start the things connected to hdmi and it works a short time and then silence. Never done that before.
 
Heimo666 said:
I got the beta, i restarted the Ultra. But it works good a while. And then sound disappeared. I needed to start the things connected to hdmi and it works a short time and then silence. Never done that before.
Click to expand...
Same here ..both for HDMI and Optical, this is a known bug as I shared above. Hope Wiim Team will resolve this
 
You must log in or register to reply here.

Similar threads

WiiM Team
Ongoing Beta Beta Test: Replay Gain for TIDAL
2
Replies
29
Views
2K
Smartplug
S
WiiM Team
  • Locked
Completed Fixed Resolution for WiiM Ultra using Optical or Coaxial Outputs
Replies
5
Views
767
RyanWithWiim
RyanWithWiim
WiiM Team
Ongoing Beta Beta Test: Plex
18 19 20
Replies
388
Views
29K
meltapple
M
WiiM Team
Completed Room Correction for Individual Channels
8 9 10
Replies
190
Views
13K
slartibartfast
S
WiiM Team
Ongoing Beta Beta Test: Enhanced 'Play Queue' Management
Replies
0
Views
441
WiiM Team
WiiM Team
Back
Top